Spinny Thingy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spinny Thingy
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.
I had a heap of spare 7mm stainless steel balls from spare Prusa machine parts so I designed something useful for them.
The spinny thingy requires 8 stainless steel balls@7mm and 1 M3X10mm fastener and a nut. There are two styles to choice from.
Place one inner race with the fastener inserted large side down on a flat surface and place the outer race over the inner race. Feed the balls in the race and jiggle and jangle and manipulate the outer race until you have all 8 balls inserted correctly in both parts. You will know if you have done it right because everything holds together itself. Now place the other inner race with the nut inserted on top of your half assembled spinny thingy and secure together with the fastener and spin away until your other half is annoyed with the constant incessant spinning.
No supports are required.
Happy spinning.