Original Xbox Slim

Xbox Slim Case – Designed for a 220x220 mm print bed.

• Uses original controller ports (note: only 2 out of the 4 ports)
• Designed to use the original power button.
• Works with the original Xbox power supply.
• Requires only M3 screws (6 mm or longer) and a 40x20 or 50x10-20 mm fan.
• Modular design

Assembly Steps:

1. Print the Case: Start by printing all the necessary parts.
2. Install the Power Button:
   • Take all three parts of the front button and assemble them like a sandwich.
   • Insert them together into the wall that holds the button.
   • Don’t forget to secure the Power Button Holder with screws to keep it in place.
3. Assemble the Base and Walls:
   • Attach the base to the four walls.
   • There’s one screw that needs to be installed from the bottom of the case.
   • You may need a mallet or hammer to gently fit the walls into place—be gentle with the taps!
4. Install the Motherboard and PSU:
   • Place the motherboard and power supply unit inside.
   • Secure them using the original screws.
5. Install the Controller Board: The controller board can only be placed after the motherboard is installed.
6. Add Storage: Install your HDD or SSD and screw it to the top of the case.
7. Attach the Lid: Secure the lid to complete the assembly.
8. ???
9. Profit

Notes:

• Use M3 screws (6 mm or longer) for the bottom of the case, the front power button PCB, and the lid.
• Fan Shroud: A fan shroud is included but hasn’t undergone proper testing.
• A fully editable STEP file is included for your convenience. Feel free to make any adjustments as needed!