Eevee/Leafeon Evolution Hueforge Art
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Hueforge STL of Eevee/Leafeon Artwork.
- Ocena
- 4,5 / 5
- Polubienia
- 110
- Pobrania
- 224
- Wydruki
- 2
- Wyświetlenia
- 1228
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Hueforge STL of an Eevee/Leafeon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 139.25x215.61mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA Sunlu Matte Green Transmission Distance: 3
PLA+ Sunlu Green Transmission Distance: 10
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Green
At layer #13 (1.12mm) swap to Green
At layer #22 (1.84mm) swap to White for the rest.