Trinket Trader Badge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated 4/4/24:V2 files have been added. These have been remade from scratch and now fit together better. Supports are…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Updated 4/4/24: V2 files have been added. These have been remade from scratch and now fit together better. Supports are needed for the top ring. I also print the top with a concentric pattern for the top/bottom instead of lines. There are 2 different center pieces. One is plain while the other has a wood grain texture on top.
3 part trinket trader badge I made for Renaissance Festivals.
I printed the 2 rings in grey filament and the badge with a wood grain filament. The Badge fits snugly inside the bottom ring, and the top ring glues to the top edge of the bottom ring.
Print Settings
Printer Brand:
Robo 3D
Printer:
R1 PLA Model
Doesn't Matter
Supports:
Yes
20%
Notes:
Concentric Top/Bottom Pattern is suggested for the top ring to improve quality.
Supports needed for the lip on the underside of the top ring.
I printed the bottom and center pieces with 0.2mm layer height w/ adaptive layers and 0.12 layer height for the top ring.
I will revise the files to move the lip to the bottom ring and/or remove the round bits from the top if there is interest.
Category: Accessories