Scheppach OSM600 Hose Absaug Adapter DN50/HT50
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For my Scheppach OSM600 I needed a special angled adapter to fit in the corner of my shop. Therefore I designed a hose…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
For my Scheppach OSM600 I needed a special angled adapter to fit in the corner of my shop. Therefore I designed a hose adapter which fits on one side on the maschine and on the other to a standard DN50 / HT50 or 50mm Hose.
Print without supports! Works perfectly fine!
I used prusa slicer with a custom z-seam - that's how I got the best quality.
Make sure that your machine has the right hose plug diameter - mine was 38,5-38,65. There are a lot of similar looking machines out there!
Print Settings
Printer:
FLsun Q5
Rafts:
No
No
Resolution:
0.2
100%
Filament: Redline PLA Eisengrau
Category: DIY