Formula 1 - Circuit de Monaco LED Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Circuit de Monaco wall mounted led lamp easy print.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Circuit de Monaco LED Lamp.
Print base with 60% or more infill for the top part 80% or more is preferred to work as a diffuser if needed.
Top can be printed with white filament I recommend doing it with clear filament to let light pass thru better also flip the model so it is facing down when printing the top.
To assemble just follow the arrows. Use super glue or fuse it with more filament.
There is no pre-made hole for the LED wires so you can place it wherever you want it can be done with a rotating tool or a soldering iron.
To mount on wall 4 pieces with premade holes are available each specific to a corner of the track.
It fits LED strips up to 12 mm thick.
It is 102.7cm(40 in.) X 59.8cm(23.5 in).