Vintage Television
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Retro television for use with an OLED and an Arduino or ESP32.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 610
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is an easy to print television style enclosure for a 2.4" LCD or OLED, a push button and enough room for additional electronics (in my case a D1 Mini). Freely modeled after the set in the last photo.
It is easy to print and can be customised at will using the OpenScad source model.
Printed in PLA:
Back.stl in grey, Table.stl and ControlPanel.stl in brown, Case.stl in sand colour (or very light brown).
LCDBracket.stl in dark brown and bronze for the letters. Printed with supports so that you can change the colour of the letters.
The ControlPanel has room for a push button and is printed side ways with the option “Fuzzy skin” on all outside walls to give a nice textured effect.
I glued the set to the table with superglue. The tube.stl (bezel) needs also to be glued.