1 / 5
Prop-Gummi Tool / Prop rubber band tool — zdjęcie 1
1 / 5

Prop-Gummi Tool / Prop rubber band tool

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tool zum Herstellen von Anklapphilfen für Klapp-Propeller / tool for making folding aids for folding props

Ocena
0 / 5
Polubienia
3
Pobrania
37
Wydruki
0
Wyświetlenia
198
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Prop-Gummi Tool

Das Prop-Gummi Tool erleichtert es, passgenaue Anklapphilfen für Klapp-Propeller zu erstellen.
Fertige Gummiringe haben den Nachteil, dass man oft nicht die passende Größe mit dem passenden Durchmesser vorrätig hat, egal ob in der Werkstatt oder auf dem Flugplatz. Ausserdem sind elastische Kordeln durch ihre Stoffummantelung robuster als die üblichen O-Ringe.
Das Prop-Gummi Tool dient dazu, eine elastische Kordel (oder auch Hutgummi) auf die passende Länge zu knoten.

So geht's:
Elastische Kordel um den gewünschten Durchmesser wickeln (eine Windung).
Kordel mit einem normalen Doppelknoten verknoten.
Überstehende Kordelenden abschneiden.
Fertig.

Ich verwende i.d.R. 1,5mm elastische Kordel von Prym (siehe Bilder).
Das Tool bietet die Durchmesser 27, 30, 33 und 37mm

Filament: PLA oder PETG


---
Prop rubber band tool

The prop rubber band tool makes it easier to create precisely fitting folding aids for folding propellers.
Ready-made rubber band rings have the disadvantage that you often don't have the right size with the right diameter in stock, whether in the workshop or at the airfield. In addition, elastic cords are more robust than the usual O-rings due to their fabric coating.
The prop rubber band tool is used to knot an elastic cord (or rubber band hat) to the right length.

This is how it works:
Wrap the elastic cord around the desired diameter (one turn).
Knot the cord with a normal double knot.
Cut off any excess cord ends.
Finished.

I usually use 1.5mm elastic cord from Prym (see pictures).
The tool offers diameters of 27, 30, 33 and 37mm

Filament: PLA or PETG

Tagi