Apogee FAT for Orbiter 2.0 - Bambu Hotend, Noctua Cooler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed from the original Apogee toolhead for Ender 3 (v2), and optimized for a Bambu hotend cooled by a Noctua 4020.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 123
- Wydruki
- 2
- Wyświetlenia
- 929
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a knockoff Bambu hotend and I already has a Noctua 4020 cooler. There wasn't any toolhead for my needs unfortunately, so I've done one of my most challenging CAD work. Not an engineer here, but a designer. Anyways, I wanted to do a really good job with my editing. Any feedback welcomed! ✌
Overall I tried to change the original Apogee parts at least as possible, and I ended up changing these:
- Fanmount
- Hotend base
- Wire cover
Print settings
Few more thoughts
I used 3M*3*4.2 mm brass heat inserts to fasten the bambu hotend. The rest is square nuts as intended. If you can figure out how to change the hotend base for square nuts instead, feel free to remix my design.
I also included one of the mounts provided for probing. Unchanged. (BLTouch mount, which I believe meant for CR Touch. I use BLT.) If you interested about what I changed, just check my remix description.
You can find all three files in step and stl.