Bike ChainDrying guide for Air Compressor "blow guns" (chain cleaning & hot waxing)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A guide to assist with drying your bike chain after cleaning.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 1358
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This accessory for Campbell Hausfeld style “blow guns” assists with using an air compressor to fully dry a bike chain after cleaning. In preparation for hot waxing, it's good to make sure that your chain is fully dried internally, which is not possible with a towel alone. Using an air compressor saves time by removing the need for drying your chain with a hair dryer or in front of a heater after using a towel.
This model fits over the male to female adapter that comes with many of these blow guns. Mine measured a hair over 9.4mm diameter, so I designed the model with a slightly undersized 9.4mm hole. If your printed part is not a tight sliding fit, drop the part in a bowl of boiling water for a few seconds, then slide it on the adapter end. Dunk the model in cold water to cool it and you'll have a very tight fit which is still removable with some force.
I'm happy to adapt the model to fit other diameter adapter shafts, or you can do so yourself using the onshape model: https://cad.onshape.com/documents/6e5b9ef4f0e3adf14229952c/w/71bd08d4f21ffd249cf8aab2/e/470afa2ec8a02e6c261fa793?renderMode=0&uiState=66a298726cad1a3df56fe2d6