1 / 11
Ender 3 v3 se upgrade to 40mm and 5015 fans +KE hotend option
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 3 v3 se cooling tuning to 40mm and dual 5015 fans for both stock and v3 KE ceramic hot end.
- Ocena
- 4,75 / 5
- Polubienia
- 336
- Pobrania
- 1563
- Wydruki
- 7
- Wyświetlenia
- 11 597
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 7) (Komentarze: 35)Remiksy (2)Kolekcje (357)Powiązane
This is my version of Ender 3 V3 SE cooling upgrade to dual 5015 fans, 40mm silent hotend cooler and LED (optional).
I decided to use 12V 4010 cooler due to was planning to connect LED to the same DC-DC step-down converter.
To assemble you will need:
- 5x M3x8mm screws
- 1x M4x20mm screw
- 1x M3x40mm screw
- 4x M3 heat inserts (for 4010 fan)
- 4x M3x14mm screws (for 4010 fan)
- 2x 5015 24V blowers (designed it for GDSTIME dual ball bearing 6000rpm fans from AliExpress)
- 1x 4010 24V or 12V radial fan (I have 12v Noctua)
- DC-DC (in case you going to use 12V 4010 fan).
- soldering set to change fan connectors and combine 2 x 5015 into 1 connector.
- heashrink tube for wires isolation
Support creator here: