Nerf Laser Adjuster Pt 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is the bottom part of a laser holder. It attaches to Nerf Rival picatinny rails and makes it easy to hip-fire the toy
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It is the bottom part of a laser holder. It attaches to Nerf Rival picatinny rails and makes it easier to hip-fire the blaster by showing the user where the dart will land. This part adjusts the x-axis (Left to Right) of the direction that the laser is pointing. The attachment point on top is 4.8 mm in diameter and half is cut off. All parts should slide together and the lid may need to be held down with small amounts of a thin tape if necessary.
Supports should be used but not on the worm gear, worm gear should be printed with the gear on top and thumb-screw part down
Credit:
Worm Gear: https://www.mcmaster.com/57545K624/
Thumb Screw: https://www.mcmaster.com/90200A110/
Software Used:
AutoDesk Inventor
TinkerCad:
User: Green_Guy
Part: Gear V3
https://www.tinkercad.com/things/cifNgqEobCe-gear-v3