Projector mount at 10º angle for LG PH550G
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've designed a simple support for the LG PH550G projector that holds it vertically at a 10º angle to the wall. It is…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 716
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I've designed a simple support for the LG PH550G projector that holds it vertically at a 10º angle to the wall. It is used to project images at the ceiling, for watching movies in bed.
The support is made of two parts linked by a T-joint. The mount is very sturdy, fixed to the wall by two 8 mm screws, while the projector is held by a 1/4"-20 standard mounting screw.
By design there is a 0.5 mm gap between parts, but depending on the print settings, the T-joint might need some sanding.
Print Settings
Printer:
Metamáquina 2
Rafts:
No
No
Resolution:
0.25
50%
Filament: Filamentos 3D Brasil ABS Natural
Category: Computer