Filament Holder for Metamaquina
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a filament holder I made for my Metamaquina 2. It snaps right on the top of my printer without any screws or…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is a filament holder I made for my Metamaquina 2. It snaps right on the top of my printer without any screws or assembly/disassembly.
Instructions
Just print the two supports and they should be ready to go.
I used a 12 mm aluminum tube for the holding the spool, but I also included an STL for printing your own pin, in case you don't have a suitable tube.
The files are exactly the same, but you can print one at a time using the "Single" version or both at the same time using the "Double".
I've had some issues with warping, so I would recommend printing one at a time, but if you have solved all your warping issues, just print them both at the same time.
Category: 3D Printer Accessories