Stackable & "gridable" case for Nordic nRF52-DK
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed Stellarinnovations design so the boards can be stacked or connected in a grid. I have included a base version…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 768
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed Stellarinnovations design so the boards can be stacked or connected in a grid.
I have included a base version that is altered to fit boards with the new thicker plastic battery holder and allow the NFC-antenna to be placed beneath the board.
Also included is a smaller test piece that allow you to make sure that the printer can handle the tight tolerances for the connecting tabs without having to print two full cases.
Print Settings
Printer:
Rigidbot Big
Rafts:
Doesn't Matter
Doesn't Matter
Resolution:
0.2
18%
Filament: Colorfabb PLA/PHA
Notes:
0,4mm nozzle used for all prints during development of this.
Category: Electronics