Stackable Storage Box - Gridfinity 5x5 with Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable storage box with a Gridfintiy Base 5x5 and uses 6u bins.
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 371
- Wydruki
- 1
- Wyświetlenia
- 2539
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of Perinski's design. https://makerworld.com/en/models/549604#profileId-467957
Changes I made are adding Gridfninty 5x5 Base. Pins may need a punch and hammer to lightly insert. No need for wires or screws. This can all be printed.
You will need to print 4 pins and 2 latches per box. Lid also needs 4 pins and 2 latches.
Printed on Bambu Labs X1C with default 0.20 standard settings
Filament Bambu PLA Basic. I chose basic as it is what I had lots of on hand.
Gridfinity Base uses 6x2mm round magnets. I did not install with any superglue.