Zooz ZSE44 Temperature/Humidity Sensor Table Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for the Zooz ZSE44 Temperature & Humidity Sensor, which allows you to place it on a table or other flat surface.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a table stand for a Zooz ZSE44 Z-Wave Plus 700 Series XS Temperature and Humidity Sensor with Mounting Bracket (purchased separately). The ZSE44 sensor snaps into the mounting bracket and that assembly then snaps into the table stand. No screws or fasteners are required, and the sensor can be popped out of the stand for easy battery replacement.
I printed this on an Ankermake M5C in Normal mode (0.2 mm layer height, 50-250 mm/s speed), with the stand placed on it's side on the bed, without supports.
2 Sep 2026 Update: I am adding the OpenSCAD source code file, for anyone that may wish to modify this model.