92mm Desk fan inspired by Noctua
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable Desk Fan with 92mm Fan
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 571
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
What:
I created my own desk fan based on the model created by Noctua, but using a 92mm fan I had at home.
Assembly:
No screws are needed for the base-side part mount.
Two or four screws are needed to connect the fan duct to the fan
When assembled there is an overlap between the side parts and the base, so that friction helps keep the fan in place.
Printing:
I recommend printing the "tilted base" to maximize the resistance of the side walls and using the fuzzy skin option for the base.
Info:
The model uploaded is the second version, improved and strengthened because the first version (in the photo) was too weak, tended to curve the base, therefore decreasing the force applied to the side supports.