Ball Vape Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple 2-piece handle for Ball Vape Heating Coils
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I don't like the look of wood handles for ball vape heater coils, so i ordered mine without a handle and just designed a nice roundish (but not completely round) handle myself. This fits heating coils with a 8/9mm metal tube (see photo).
The two halves are held together with M3x20 bolts and M3x5x4 heat set inserts (4 of each).
The design is a pretty tight fight, but thanks to the bolts and inserts you'll be able to lock the metal tube into place very securely - so make sure to align the heating coil properly before tightening the bolts.
ProTip if you have a loose cable sleeve: Put everything in place - but don't tighten the bolts yet - and gently twist the cable sleeve where it exits the handle. That should make sure it doesn't get pinched by the edges of the channel while tightening the bolts.