1 / 1
GReddy Type S BOV (Blow Off Valve) Flange — zdjęcie 1

GReddy Type S BOV (Blow Off Valve) Flange

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Don't know how to weld? Don't want to wait on some weird Flange with bad welds from Ebay? Why not 3D print it?

Ocena
0 / 5
Polubienia
2
Pobrania
29
Wydruki
0
Wyświetlenia
251
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

This BOV Flange will fit any GReddy Type S or newer GReddy BOV. I tested with the GReddy FV II. 

This particular model is compatible with 2.5" inner diameter intake piping. I can make a bigger or smaller version at request. 

I have tested using Mishimoto Hose Clamps going as tight as I can physically make them go. There is no cracking. 

Since this is a hot part, ensure you are using ABS or better. Nylon would be preferrable. 

I have only tested on the cold side of the intercooler. If someone is more brave than I am, please let me know your results using it on the hot side. 

Tagi