Prusa XL enclosure SwitchBot smart hygrometer thermometer upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An upgrade to the stock Prusa XL enclosure hygrometer thermometer to a more accurate one
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 499
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I use the SwitchBot smart hygrometer and thermometer in all of my filament dryers because it has a much more accurate hygrometer sensor good from 0-99% RH +/- 2%. This unit also has the ability for remote monitoring with either bluetooth or using their hub which I find helpful. I figured an upgrade to the one that came with the XL enclosure would be in order since I have determined I like this in my filament dryer. I also have designed one for the regular Prusa enclosure.
Materials:
https://www.amazon.com/gp/product/B09GYKJ3WL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
https://www.mcmaster.com/94180A373/
https://www.mcmaster.com/94414A741/
Print Details:
I printed using prusament ASA, no supports needed. Default settings in the enclosure with a bit of heat added to keep the enclosure temp around 40C. Any other material would work just fine as well. I used acetone smoothing on the cover but that's, of course, optional.
Assembly:
Just print one each of the frame and cover, add the plastic threaded inserts and screw it in to the stock hole on the XL enclosure. The SwitchBot comes with an adhesive backed magnet and there is a molded cutout for this in the design. Its use is optional (I didn't use it) as the hygrometer has a nice friction fit and is held captive against the enclosure plexiglass.