1 / 4
simple TPU lid for Red Bull can (EU 250ml), also for Nescafe cans etc.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a simple design but it works - it fits very good. Print with TPU
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
It's a simple design but it works - it fits very good.
Print with TPU, slow speed, infill 15%.
If you want, you can also print the lid downscaled to 99% (all axes) to make it more tight - it's about 0,5mm less in diameter = 0,25mm radius / each side.