Anboks S1 - Mini ITX PC Case -7.8L
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small simple to print PC Case that I use as a home media PC / server. 230x170x200mm
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 1025
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Overview
Simple PC “Server” case that I used for my home media / server PC at home. Every side is printed flat on the bed so it's very easy and fast to print.
Size wise it is: 230x170x200mm
It supports 2x3.5" or 2x2.5" HDDs, SFX PSU, GPU less than 180mm in legth and CPU cooler up to 55mm.
Magnets are 5x1mm in size.
Power button is 22mm, restart button is 12mm in diameter.
Screws are used only for mounting HDDs and PSU. One might need to use longer screws that normally required.
I did some final improvements at the end without trying them out so let me know how that works out.
Instructions
External Parts (except middle) are to be printed without top & bottom layers and with infill of preference. For me grid/rectangle is best with around 20-25% infill as that gives this beautiful mesh look. I print with 10 walls to get sturdy print. At least 6 is recommended for the locking mechanism.
Please see following for more instructions.