Holder mount (parametric) for lever Wire Connector 24 to 12 AWG
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple adjustable holder mount to keep lever connectors in place using a tape
- Ocena
- 3 / 5
- Polubienia
- 15
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 637
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The model is designed to hold an arbitrary number of lever wire connectors. The top bar snaps into place.
Included Fusion 360 f3d file can be used to change the number of connectors (Modify>Change Parameters>n_connectors). You can also modify the model to add mounting holes etc.
I am using the holder with 3M ‘Extreme Fasteners’ velcro tape.
https://www.amazon.com/gp/product/B00IGIUP9O/
The connectors are pretty generic, I got mine over here:
Lever Wire Connectors, HTCELLE 60-Piece Quick Connect Electrical Splicing Kit for Compact Inline Terminals - 28-12 AWG
https://www.amazon.com/dp/B0C3LBWSTZ
Print the top snap piece sideways.
Based on the original model of the connector:
https://www.printables.com/model/842131-lever-wire-connector-24-to-12-awg-model/