DS3D4U Pet Step V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complete overhaul of the original Pet Step model, it now features a collapsible design where both steps can be folded.
- Ocena
- 0 / 5
- Polubienia
- 4
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Standard Digital File License
An upgraded version of the original pet step. It require significantly more non printed hardware to work, but the design allows for both the upper and lower step to fold. this design has been print tested in PLA using the settings included in the .3mf files, it should also be printable in PETG with a different filament preset. This design uses a 1x8 board for the steps, with a length determined by you, included is a clamp that should allow the design to be used on non flat sideboards. Please refer to included documents when assembling the steps. The step was tested with a 10lb cat.