Vacuum Cleaner for the XRP robotics kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small vacuum cleaner that can be mounted to the rails of the XRP robotics kit
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 902
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
By attaching this vacuum to your XRP kit you can create a small roomba for your desk or your other small-scale cleaning needs :)
Required hardware:
6x 30mm M3 screws
9x heat insert threads
5x 10mm M3 screws
2x M3 nuts
28mm DC motor
Filter paper
Assembly:
Press 6x heat insert threads into the dust chamber and 3x into the motor mount.
Press the motor into the motor mount and screw the motor bracket onto the motor mount using 3x 10 mm M3 screws
Press the impeller onto the motor shaft
Screw the snout to the dust chamber using 2x 10mm M3 screws and nuts
Put filter paper over the opening of the dust chamber
Place the impeller housing over the filter paper
place the motor block over the impeller housing
screw the 6x 30mm screws though the motor block, impeller housing and dust chamber
Screw the screw cap into the dust chamber and slide the XRP bracket onto the main assembly.
Vacuum :)