Angle finder using gravitation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angle finder for measuring slope of some object from below
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is an angle finder for measuring slope of something from below.
There are two versions:
- Single version, where the marks are debosed so I'd recommend having the string on the other side so it doesn't colide with the marks. Use the main.stl.
- Multimaterial version have marks made of different color and the surface with marks is smooth so they don't colide with the string.
With a 0.2 mm layer height there are only 2 color changes so I'm uploading a gcode with manual colorchanges for a normal Prusa Mini - you shuold start the print with the filament you want to use for the main body.
I've designed this to measure the slope of our roof.