Water tank cap for Peugeot 207
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After 12 years, the water tank cap shattered. I redid it and printed it in PLA, it should hold even if the temperature…
- Ocena
- 4 / 5
- Polubienia
- 17
- Pobrania
- 225
- Wydruki
- 1
- Wyświetlenia
- 776
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
After 12 years, the water tank cap shattered. I redid it and printed it in PLA, it should hold even if the temperature in the engine compartment is a bit high (but not very high); I think it will soften a bit but it should be fine. If any problems come up I will report it!
Good print!
If you found it useful, and if you like, you can offer me a coffee!, it will be an extra motivation to continue designing.
Print Settings
Resolution:
200
Infill:
60
Filament:
No brand PLA or other As you want
Notes:
Print it with a support of 5 mm at the base and inclined at 30 °
Category: Vehicles