1 / 1
Prusa MK4(S) and MMU3 - Orca Slicer profile (Beta) — zdjęcie 1

Prusa MK4(S) and MMU3 - Orca Slicer profile (Beta)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This profile is currently a work in progress.

Ocena
5 / 5
Polubienia
40
Pobrania
513
Wydruki
3
Wyświetlenia
2979
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Note: This profile is no longer being worked on.
This profile was originally created because many people requested a Prusa MK4 with MMU3 profile. I don’t own a MK4 myself, so the profile is untested by me.
While I did receive a bit of feedback, most people either stopped responding or provided feedback that was too unclear or poorly written for me to understand. Because of this, I’ve decided to stop working on the profile. Sorry…😊

 

Video guide

Step-by-Step video guide


Instructions to import the profile

  1. Add the "Prusa MK4" using Orca Slicers “Select/Remove printers(system presets)”
  2. Import the config by selecting file > import > import configs
  3. Adjust the filament settings if needed, look at the 2 pictures below for my settings for PLA(210 °C)
  4. That's it. Let me know if you encounter any problems :D

 

Filament settings > Multimaterial

 

 

To-Do List:

Improvements to the ramming parameters: Current problem Orca doesn't allow me to change Volumetric speed to 40 mm³/s

 

 

Change Log:

15/10/2024 - Prime tower: Improves the prime tower

15/10/2024 - Printer settings: Improves filament load and unload speed (Only for alpha version)

Tagi