Slabiimov/SLAB Bambu Studio Files
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My pre-configured 3mf file for bambu studio. All settings pre-configured for each part, printed on my A1-Mini.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 1076
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This file contains all of the parts ready to be printed on a bambu printer. I have configured all of the parts with the proper settings, and have built the blaster using these prints! This was printed on the A1 mini in 22 prints. If you have the larger printers, you could easily move things around to reduce this number. This is the slabiimov version. The colors can be changed to see potential color options as well. The original files are designed by Sillybutts, and the slabiimov components are compiled by EpictheHamster. The only extra parts I needed were the 10 M3 12mm screws, as I had enough extra screws included with my SLAB kit from Outofdarts.