Collapsible Cup/Can/Glass Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collapsible and foldable holder for a cup or a can or similar. Screw to a wall or attach to an IKEA Skådis board
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I have previously been asked (by a vanlifer) to make a foldable cup holder, and now I have made one!
This model is designed to be screwed onto a wall or mounted on an IKEA Skådis board.
The .3MF files are divided so that every other ring can be printed in its own color.
Screw the bottom plate into the lowest ring.
When the holder is folded up against the wall/board, there is a hook that keeps it in place and and the bottom plate should be screwed into the top ring to prevent the rings from falling off.
Please note that I have not conducted any load tests.