CFOCer v1.0 Case with Integrated Aluminum Heatsink
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An aluminum and 3D printed case for the CFOCer v1.0 designed with M3 mounting holes to make mounting easy. See the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An aluminum and 3D printed case for the CFOCer v1.0 (blog post, link to purchase) designed with M3 mounting holes to make mounting easy. See the included drawing for the mounting hole pattern.
Parts:
- 1mm Silicone heat pad for electrical isolation
- 5mm Nylon spacer
- 5x M3x8mm bolts to mount the PCB to the case
- 8x M3x6mm bolts for case assembly
(Optional) 4x M3x25mm+ bolts for mounting. I CNCed the aluminum top and bottom plate and 3D Printed the sidewalls from PTEG.
You can read more about the CFOCer v1.0 Brushless DC Motor Controller and this case on my blog: https://blog.nathantsoi.com/article/vesc-bldc-control/ or purchase one on the https://store.vertile.com/product/cfocer/.
Category: Robotics