Cree CX_13 COB LED wire soldering jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm forever trying to keep these wires in the correct position to solder, so here is a jig for a 13.35x13.35mm Cree COB
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
The jig holds a standard 2 wire cable in place for easier soldering. I printed in PETG using a 0.4 nozzle and a 0.2 mm layer height on a MK4 with Matte Black Prusament.
I soldered SAC305 with the iron at 340 C with no problems (there is an air space under the COB for cooling).
The COB is quite a tight fit, so I used a file to remove any imperfections on the internal sides but it didn't take much.
It worked pretty well first time. I also used a pair of forceps to push down slightly on the insulation of the wire being soldered while it cooled to keep it in place.