Vintage Matco tool box drawer stops
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement stops for Accuride drawer slides used in vintage Matco Pro-Formance NRHA series tool box.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The rubber stops have disintegrated on the vintage tool box.
I tested several one piece TPU stops but was not pleased with the results.
The ABS stops are pressed into the drawer slide using a screw driver handle. Once in, the locking wedge is pressed in until they snap into place.
All parts were printed with Orca's 0.2 strength profile.
I printed and used the original 0.6 chamfer stop body. However, they were difficult to start in. The optional 1.0 chamfer body is available. The chamfer is kept to a minimum so the drawer slide impacts the the straight side, not an angle which can displace the stop out of the drawer slide.