1 / 10
Pumpkin_Lamp - Halloween- Kürbislampe für elektr. Teelichter — zdjęcie 1
1 / 10

Pumpkin_Lamp - Halloween- Kürbislampe für elektr. Teelichter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,80 € – 0,97 € netto (bez VAT)

Dla pliku: Kurbis Halloween Lampe Deckel_einfarbig_0.4n_0.2mm_PLA_MK4IS_47m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,88 € netto (środek widełek).

Masa podana przez autora
13 g
Czas druku podany przez autora
47,4 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Pumpkin_Lamp for decoration on Halloween or whenever you like Kürbislampe für Halloween oder wenn Ihr Lust drauf habt

Ocena
5 / 5
Polubienia
35
Pobrania
490
Wydruki
3
Wyświetlenia
1435
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Pumpkin lamp for table decoration e.g. on Halloween.

!!Attention only use with electric tea light!!

The tea light I use is 45mm by 45mm by 45mm in dimensions and fits easily.

Works absolutely great and looks great.

I uploaded two variants of the lid, 1x two-color (the stem is green) and 1x one-color. MKS is also not necessary for the 2-color version. Simply start printing and about 2 minutes before the printer is finished it gives a signal to change the filament and interrupts printing. Insert the desired color and continue.

Printed with Prusa MK04

PLA

Supports Yes Organic

 

Kürbislampe für Tischdekoration z.Bsp. an Halloween. 

!!Achtung nur mit elektrischem Teelicht nutzen!!

Das von mir verwendete Teelicht ist 45mm auf 45mm auf 45mm in den Abmessungen und passt locker rein.

Funktioniert absolut top und sieht super aus.

Habe zwei Varianten des Deckels hochgeladen, 1x 2farbig (der Strunk ist grün) und 1x einfarbig. MKS ist auch für die 2 farbige Variante nicht nötig. Einfach den Druck starten und ca. 2 Minuten bevor der Drucker fertig ist gibt er ein Signal zum Filamentwechsel und unterbricht den Druck. Die gewünschte Farbe einlegen und fortfahren.

Gedruckt mit Prusa MK04

PLA

Supports Ja Organic

 

 

Tagi