Silly shell adapter for 16mm OD barrels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts a standard 16mm Barrel to take silly shells while retaining the ability to shoot darts through it
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 703
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
modifies the front part of a wildstyle blaster to be able to mount it to barrels with a 16mm outer diameter.
so you can either shoot regular darts out of the barrel it mounts to, or shoot pretty much any ammo type from silly shells.
just make sure you don't have a dart loaded while you have a silly shell in there, which usually means priming the blaster with no magazine in it.
i only tested it with my SLAB and it performed about as well as my Yeethammer, only with it not being able to shoot demolisher missiles as well due to the long barrel and lower plunger volume.
you'll need the standard ejector lever screw, with extra hardware being a 14mm ID x2,5mm O-Ring, a M3 nut and a M3x10 screw