1 / 3
Dummy 13 "Zendwarth" Segmented Armor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of shoulders, and armor that i modeled for my own custom Dummy 13 "Zendwarth".
- Ocena
- 5 / 5
- Polubienia
- 147
- Pobrania
- 431
- Wydruki
- 2
- Wyświetlenia
- 3232
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (0)Kolekcje (245)Powiązane
This is a set of shoulders, and armor that i modeled for my own custom Dummy 13 "Zendwarth".
- They're scaled to the standard Dummy 13 frame, HOWEVER, these have never been printed under 250%. You MUST Scale these up before printing. I recommend scaling everything in the entire file up as a group.
- I secured these with hot glue, it's just enough to keep them in place and not affect the ball joints, or allow them to move in the “wrong” way.
- Superglue can be used for the Shoulder segment clips, but carefully.
- Included are 6 of the Dummy 13 Clavicles for each arm. You'll need to print 8 Clavicles total. Extend as long as you like, but keep weight in mind.
- PETG is recommended at any size above 500% for the Shoulder bone. Clavicles seem to do fine at any scale.
Please, let me know if you have any issues with the file.
7/29/24 Edit: Updated the pictures to be more clear about the included files. Added .3MF and .STL versions of the individual files.