1 / 3
4 inch Exhaust Duct Adapter for QIDI X-Max 3 — zdjęcie 1
1 / 3

4 inch Exhaust Duct Adapter for QIDI X-Max 3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upgraded the "lack of an actual" exhaust system for the QIDI X-Max 3. Will link all components as well.

Ocena
5 / 5
Polubienia
10
Pobrania
77
Wydruki
1
Wyświetlenia
413
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

After building some parts and trying to just add onto the existing exhaust fan/system, I decided to just completely replace the fan with an inline fan.

I built this duct to attach to standard 4" inch flexible hoses to utilize common parts.

I used this inline fan: 
https://www.amazon.com/dp/B07JB292JC?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

I used this ducting:
https://www.amazon.com/dp/B07WRDTX4C?ref=ppx_yo2ov_dt_b_product_details&th=1

 

I used this window vent:
https://www.amazon.com/gp/product/B0C8NDR8SM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

For connecting the duct to the back of the printer,  you need these ‘not as common’ screws (thanks QIDI):
https://www.amazon.com/gp/product/B084P3MG5X/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

 

The difference in perceived smells is night and day. I have an air quality monitor on the way, to check and test the actual numbers, but for now, I'm quite pleased.

 

The duct was printed in ASA, .20" layer height, no supports. 5mm brim (could probably go 10mm for more safety because I had very slight warping w/ 5mm)

4 walls, 10% Gyroid

Inner/Outer/Inner.

Tagi