1 / 1
Pastamatic Remix with 1kg and 5kg Spool Holders — zdjęcie 1

Pastamatic Remix with 1kg and 5kg Spool Holders

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament Spool Rewinder with improved parts. YMMV if you think its improved.

Ocena
5 / 5
Polubienia
24
Pobrania
346
Wydruki
3
Wyświetlenia
1632
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Alright I took the existing models and put them onto separate plates. Some of the bases are thicc so they need their own plates. Nothing “needs” a brim and probably prints best without them. I put this all together on my Bambu X1C (Fancy I know but just roll with it) and everything came out great. 

I would suggest printing the main parts out of PLA+ (Go on amazon polymaker has some great colours) for some extra strength. I also did print out my gears in PETG because I wanted them strong like a good Guiness (Full of iron that is). You will also need 19 bearings for this, a lot I know but well worth it. 

Also have some quick links to Amazon to help search for the extra's you'll need (No they aren't affiliate links)

19 - 608 Bearings

Polymaker PLA+ Filament

Polymaker PETG Filament

You'll also need a ¼ HEX bit and a small piece of PTFE tubing (no more then like a ½ inch or about 12mm) 

Have fun and enjoy!

Tagi