1 / 5
Beyblade X - The Only Grip You'll Ever Need (TOGYEN) — zdjęcie 1
1 / 5

Beyblade X - The Only Grip You'll Ever Need (TOGYEN)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A grip for Beyblade X launchers, faithful to the original with minimal hardware.

Ocena
5 / 5
Polubienia
62
Pobrania
527
Wydruki
3
Wyświetlenia
5432
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

EDIT: Added an updated version of the connector core that features extra cutouts to let the notches of the Beyblade X launchers sit in properly, without causing damage to the launcher.

With the release of Beyblade X in the west via Hasbro, some people might find themselves uncomfortable just holding the launchers as they are. So, they might either need to import Takara Tomy's grip, or print one of the grips available online - which are only friction fit and don't feel stable.

So, I designed this grip system real quick to let people print a grip that feels stable and comfortable, while allowing a lot of customizability in terms of handle shape.

Just slide back the locking piece, then put your Beyblade X String Launcher or Beyblade X Winder Launcher into the grip. Let go of the locking piece and your launcher of choice is secured on the grip.

Extra hardware needed:
2x M3x15mm bolt (M3x10mm bolts also work with some fenagling)
2x M3 nut
2x ⌀5.6x17.45mm spring

Load files into the slicer as they are, then add support enforcers at 40° if using PrusaSlicer - or just enable supports everywhere.

Assembly is straightforward:
-slide the BBX Grip Connector Lock piece into BBX Grip Connector Core piece, with the holes  facing outside
-put springs into the holes in the BBX Connector Lock
-slide on BBX Grip Straight (or custom handle if you made your own)
-use nuts and bolts to secure the BBX Grip Straight onto the BBX Grip Connector Core

Tagi