Philips Espresso Machine 2200 Series - milk frother head holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A basic holder for the milk frother head of the Philips 2200 series
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 532
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Due to multiple plug in / plug out, the rubber end of the milk frother device became loose and no longer stays firmly in place, so when the steam function is turned on, the milk frother device is thrown out.
I designed this fixing system, to prevent that with the help of a toothpick.
It should work on a various range of Philips EP series like EP22xx , EP32xx, etc.
_______________________
UPDATE - v2
I decided to adjust the length a little bit so it can be bent more when using the screw.

______________________
v1 below
I used a toothpick (cut in half) to secure the milk frother in place, because is cheap and widely available in any kitchen, but you can use a M2.5 - M3 screw if you like (although, that might prevent you from cleaning the head properly) .
________________________
You will also need a 2-2.5 mm drill bit to drill the hole trough the rubber of the milk frother (see the picture below).

I also uploaded the .f3d files, so feel free to make it better and share it with us 😊!