voron 2.4 bamboo A1 brush bucket

I wanted to use the bamboo A1 brush but with bucket attached to it. I really don't like small plastics flying all around when cleaning the nozzle. (My voron 2.4 is a 300mm build).

Credits to the author → https://www.printables.com/model/882364/remixes for the Joint.stl and Vertical mount.stl
 

You need 4 typical voron brass inserts and M3 8mm bolts….. See https://www.printables.com/model/882364/remixes for the gist of it. 

If you like me use the mod to help you guide the bed plate, you will have to chamfer it a little. You will understand what I mean if you use it. 

I used the typical voron parts recommended print settings and ABS. 

These are my happy hare settings. I match variable_park_xy to what I also set in my clean_nozzle.cfg ,  file attached, rename to .cfg

#
variable_enable_park            : True; True = Enable parking move when printing (not runout), False = disable
variable_enable_park_runout     : True; True = Enable parking move during runout handling, False = disable
variable_enable_park_standalone : True; True = Enable parking move when not printing, False = disable
variable_restore_xy_pos         : "last"; last|next|none - What x,y position the toolhead should travel to after a toolchange
variable_park_xy                : 6, 307; Coordinates of park position for toolchange
.........
variable_park_after_form_tip    : True; True = if tip cutting to delay move to park position, False = park immediately
.........
variable_user_pre_load_extension    : 'CLEAN_NOZZLE_FAN_ON'; Executed after default logic
variable_user_post_load_extension   : 'CLEAN_NOZZLE'; Executed after default logic but before restoring toolhead position

This is my PARK macro, again matching the X position x_park .

[gcode_macro PARK]
description: Park toolhead safely away from print
gcode:
    {% set Z_HOP = params.Z_HOP|default(printer.toolhead.position.z)|float %}
    #{% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
    {% set y_park = printer.toolhead.axis_maximum.y|float %}
    {% set max_z = printer.toolhead.axis_maximum.z|float %}
    {% set act_z = printer.toolhead.position.z|float %}
    {% set act_y = printer.toolhead.position.y|float %}
    {% set x_park = 6 %}
    {% if act_z < (max_z - Z_HOP) %}
        {% set z_safe = Z_HOP %}
    {% else %}
        {% set z_safe = max_z - act_z %}
    {% endif %}
    SET_VELOCITY_LIMIT ACCEL=9000
    G90 
    {% if act_y < 43  %} ; To void hitting the filametrix screw.
       G0 Y60 F24000
    {% endif %}
    {% if printer.toolhead.position.y > 293 and printer.toolhead.position.x != x_park %}
      G0 Y{y_park - 14} Z{z_safe} F24000
      G0 X{x_park}
      G0 Y{y_park}
    {% elif printer.toolhead.position.y != y_park and printer.toolhead.position.x != x_park %}
      G0 X{x_park} Y{y_park - 14} Z{z_safe} F24000
      G0 Y{y_park}
    {% endif %}