ROG Ally Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this so that I can mount my ROG Ally to a wall for use in a docked mode.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 177
- Wydruki
- 0
- Wyświetlenia
- 928
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
I use my ROG Ally in docked mode often and this enables it to be securely mounted to the wall and plugged into my dock setup that I have for it. It has some slits for the speakers and I used some sticky foam to place on the inside to prevent scratching the plastic.
The pictured design was an earlier iteration that used command hooks to hold it in place. This iteration uses bolts and has spaces behind so that if you are using Riv Nuts the print will still be flush with the wall.
I printed in PLA in the orientation that the print comes in, the design is strong enough that it can use a basic 2 perimeter profile on your printer and requires no supports.