1 / 3
Fractal North Pi Hood Scoop Add-On — zdjęcie 1
1 / 3

Fractal North Pi Hood Scoop Add-On

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Add On for Fractal North when Pi is used with Ice Cooler Tower. Based on original Model from Fractal.

Ocena
0 / 5
Polubienia
27
Pobrania
56
Wydruki
0
Wyświetlenia
1194
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update [July 30th 2024]: Files are complete. Both STLs and STEP-files are available.

That was a fun project. Thanks for the original creator of the North Pi! Fractal made these files available on their website: https://www.fractal-design.com/north-pi-3d-files/

I've modded the side panel to make room for the Ice Cooler Tower while keeping the design in line with the main part of the case. Prints easily, ‘wooden’ parts may benefit from a little support if printed at a 45 deg angle.

Cheers!

Tagi