Floating Plant Ring (square)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed to help maintain your aquatic floating plants and keep them from over growing or scattering.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design was made to be able to maintain any aquatic floating plants for aquariums. It is light enough to float at the surface, and heavy enough to prevent being knocked over by waterfalls or filter pumps and air stones.
PETG is by far the safest filament type to use in areas where water and aquatic life are available as it is considered food-safe (depending on brand) and less worry of toxins leeching into your tank.
Can be printed as-is, but I do recommend adding an outer-brim for better plate adhesion.