Modular coral egg crate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular coral rack/egg crate/mesh Ideal also for skimmer level adjustment (long and short legs available)
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 365
- Wydruki
- 0
- Wyświetlenia
- 1033
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
Modular coral egg crate, 16mm holes, 3mm spacing, fits perfectly. Printed with 0,4mm, 0,2 layer height, 100% infill, no need for supports. Print it so the external pins are on the print surface. I do recommend PETG.
I have also added calibration print, so you can adjust your settings before printing the whole thing and make sure it fits correctly.
5mm, 8mm, 10mm height version
If you want to connect/disconnect it and can't push it with hands, beat it with screwdriver handle or rubber mallet.
Leg v3 has a hole to remove trapped air inside so it sinks easily and there are removed edges so it fits each way.
Added STEP for the mesh so you can make bigger areas.