Gridfinity Caliper and Tool Holder 3x1x7
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity holder for generic calipers, deburring tool, utility knife, and ruler. 3x1x7
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Gridfinity holder with slots for generic calipers, a deburring tool, a utility knife, and a ruler. Also has an additional generic rectangular slot that fits the tube of metal grease that comes with the Creality K1C, but could fit any number of other things as well. Bin is 3x1x7, with no magnet or screw holes in the base. If you would like a version with magnet or screw holes, let me know and I can modify this one and add the files.
Print Settings (using PLA):
Nozzle: 0.4mm
Layer Height: 0.2mm
Infill: 15%
Walls: 3
No supports necessary. Depending on plate and filament, you can use a small brim for the bases if you are having adhesion issues.