Samsung Galaxy Tab A7 Lite Wall Mount w/ Camera Cutout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for Samsung Galaxy Tab A7 Lite with magnet faceplate, camera cutout and cable passthrough.
- Ocena
- 2 / 5
- Polubienia
- 9
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 504
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a wall mount for my tablet running my Home Assistant dashboard in Fully Kiosk Browser. Tried a few different ones and this one stood out as feeling not too flimsy and hiding the cables for my setup.
Modified an existing design by altering the magnet size used (to something I had lying around), as well as adding a camera cutout so that the camera of the tablet could be used while hanging on the wall (I use it as a motion sensor in Home Assistant).
---
The base can be printed facing upwards, and the lid should be printed facing down (faceplate on build plate). No supports needed.
---
Modifications have been made with Solidworks for Makers.