Gloomhaven Standee Flight Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made risers that insert into modified bases for flying monsters, the bases will pop onto the risers and can be…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I made risers that insert into modified bases for flying monsters, the bases will pop onto the risers and can be removed for non-flying monsters. Additionally, you can print a full set of bases and glue them to the risers.
I've only modified the bases that made the most sense to me, if others are desired, I can add those.
I've also included a platform that can be used for bases that have already been printed (in case you'd prefer not to reprint all your base). The platform should be glued to the risers for stability as the hole is not very deep.
For reference, I find the 1.7mm bases with the 40mm risers work best for me.
I expect 10 Risers will suffice for a game.
For bases, I've printed:
2x Red
8x Yellow
10x Black
16x White
I've included various extra bits to make it easier to tweak the design a bit (i.e. taller towers, modular for portability, etc).
Print instructions
Category: Toy & Game Accessories Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: Doesn't Matter
Supports: No
Resolution: .2mm
Infill: 20%