Adjustable Shower Head Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement adjustable shower-head stand
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 264
- Wydruki
- 2
- Wyświetlenia
- 864
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to replace an old shower-head stand.
I could buy one, but what's the fun in that? :-)
Printed with PLA at 0.2mm.
No need for glue or supports.
Update 1: The screw cover was missing from the files. I've re-uploaded them.
Update 2: v1.1 minor change to the base and screw_cover, so that the cover will be less noticeable. Note that the pictures are of v1.0.
Assembly:
1. Connect the base part to the wall using 2 screws (up to 4mm diameter) with 22mm between them:
Note: You can connect to the wall after the assembly is done, but I find it a bit less convenient.
2. Use the screw cover to protect the crews:
3. Connect each printed screw to a screw-cap:
4. Orient and hold together the side parts around the shower-head holder part:
5. Use the printed screws to secure them together on both sides:
6. Slide them onto the base part:
7. Partially release the printed screws to adjust the angle of the shower-head holder.